Availability: | |
---|---|
Quantity: | |
YQA-A
YQ
Product introduction
Piston air compressor adheres to the design concept of low speed, heavy load, suitable for continuous operation, with low exhaust temperature, small vibration, low noise and low oil consumption. It pursues low failure rate, high reliability, reasonable structure, simple system, reliable control and stable performance. A relatively complete series of products have been formed, including mobile type with air tank and fixed type without air tank. There are not only single machine forms, but also combination machines adapted to large displacement.
·Powerful large head design, good use of sufficient materials, strengthen the design of main parts, the size and weight of the head are larger than other manufacturers, high safety, coupled with low speed, especially suitable for heavy load, long-term continuous operation, high reliability and long service life.
·Especially for heat dissipation design and air flow design, the exhaust temperature is low, carbon deposition is not easy, and the efficiency is high.
·In terms of gas volume control, there are four types for users to choose: fully automatic air control, fully automatic electric control, dual-purpose air control (manual switching) and intelligent control (automatic switching in the electrical control room according to the gas consumption), so as to meet different needs of users.
·In view of the relatively high pressure ratio of the press, a special intercooler with strong cooling capacity is designed to maintain a lower exhaust temperature.
Advantage
1.Special engine head for steam protection, 96 high stroke cylinder, round enlarged crankcase, good atomization, no oil channeling, fast steam loading
2.High quality all copper motor, sufficient power, strong power
3.Thickened tank body, safe explosion-proof, complete certificates, insurance coverage
4.Copper bracket, copper one-way valve, high quality pressure gauge, double air outlet, equipped with quick connector, easy to install
Technical parameter
Compression media: air
Drive mode: Belt piston
Lubrication mode: oil lubrication
Power: 4KW/5.5HP
Noise: around 90dB
Exhaust volume: 0.6m3/min
Speed: 850rpm
Volume: 88L
Pressure: 8Bar/0.8mpa
Dimensions: 113 x 43 x 87
Use: Paint 40-60 plasma cutter small wind gun start grinding tools Wind wrench, etc.
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Product introduction
Piston air compressor adheres to the design concept of low speed, heavy load, suitable for continuous operation, with low exhaust temperature, small vibration, low noise and low oil consumption. It pursues low failure rate, high reliability, reasonable structure, simple system, reliable control and stable performance. A relatively complete series of products have been formed, including mobile type with air tank and fixed type without air tank. There are not only single machine forms, but also combination machines adapted to large displacement.
·Powerful large head design, good use of sufficient materials, strengthen the design of main parts, the size and weight of the head are larger than other manufacturers, high safety, coupled with low speed, especially suitable for heavy load, long-term continuous operation, high reliability and long service life.
·Especially for heat dissipation design and air flow design, the exhaust temperature is low, carbon deposition is not easy, and the efficiency is high.
·In terms of gas volume control, there are four types for users to choose: fully automatic air control, fully automatic electric control, dual-purpose air control (manual switching) and intelligent control (automatic switching in the electrical control room according to the gas consumption), so as to meet different needs of users.
·In view of the relatively high pressure ratio of the press, a special intercooler with strong cooling capacity is designed to maintain a lower exhaust temperature.
Advantage
1.Special engine head for steam protection, 96 high stroke cylinder, round enlarged crankcase, good atomization, no oil channeling, fast steam loading
2.High quality all copper motor, sufficient power, strong power
3.Thickened tank body, safe explosion-proof, complete certificates, insurance coverage
4.Copper bracket, copper one-way valve, high quality pressure gauge, double air outlet, equipped with quick connector, easy to install
Technical parameter
Compression media: air
Drive mode: Belt piston
Lubrication mode: oil lubrication
Power: 4KW/5.5HP
Noise: around 90dB
Exhaust volume: 0.6m3/min
Speed: 850rpm
Volume: 88L
Pressure: 8Bar/0.8mpa
Dimensions: 113 x 43 x 87
Use: Paint 40-60 plasma cutter small wind gun start grinding tools Wind wrench, etc.
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.