Availability: | |
---|---|
Quantity: | |
Features:
The sealing knife row is equipped with a safety sensor, when the package in case the flip or the operator's hand into the protection system will automatically start, the cutter stops the cut.At the same time the machine has an emergency stop button.
The sealing knife uses the United States DuPont Teflon coating anti-stick ingestive high temperature alloy knife, sealing line is strong, will not crack, will not coking, no smoke and no pollution. The original Omron number display thermostat, built-in PID function, sealing temperature is very sensitive and accurate.
Can be set at will, do not worry about temperature inaccuracies and products With the electronic governor speed control, the speed adjustment speed can be adjusted without pole, to ensure the smoothness of transmission and good shrinkage effect, and the use of copper wire motor low noise, long life.
Cuff-type PE Wrap Machine:
Knife size | 750mm |
Packaging Speed | 10 Pieces/min |
Power Supply | 220V 50Hz/60Hz |
Total Weight | 210KG |
Package size | 500*380mm |
Total Power | 1.5KW |
Dimensions | 1100×1500×1900mm |
Pressure | 5-7Kgf/cm² |
Heat Shrink Packaging Mach:
Packaging Speed | 0-10 m/min |
Power Supply | 380V 50Hz/60Hz |
Total Weight | 240KG |
Furnace size | 1500*550*450mm |
Power | 18KW |
Dimensions | 2500×750×1400mm |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Features:
The sealing knife row is equipped with a safety sensor, when the package in case the flip or the operator's hand into the protection system will automatically start, the cutter stops the cut.At the same time the machine has an emergency stop button.
The sealing knife uses the United States DuPont Teflon coating anti-stick ingestive high temperature alloy knife, sealing line is strong, will not crack, will not coking, no smoke and no pollution. The original Omron number display thermostat, built-in PID function, sealing temperature is very sensitive and accurate.
Can be set at will, do not worry about temperature inaccuracies and products With the electronic governor speed control, the speed adjustment speed can be adjusted without pole, to ensure the smoothness of transmission and good shrinkage effect, and the use of copper wire motor low noise, long life.
Cuff-type PE Wrap Machine:
Knife size | 750mm |
Packaging Speed | 10 Pieces/min |
Power Supply | 220V 50Hz/60Hz |
Total Weight | 210KG |
Package size | 500*380mm |
Total Power | 1.5KW |
Dimensions | 1100×1500×1900mm |
Pressure | 5-7Kgf/cm² |
Heat Shrink Packaging Mach:
Packaging Speed | 0-10 m/min |
Power Supply | 380V 50Hz/60Hz |
Total Weight | 240KG |
Furnace size | 1500*550*450mm |
Power | 18KW |
Dimensions | 2500×750×1400mm |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
</template>