YQSC-120
YQ
Introduction:
Spindle capper machine tightens all types of screw-on caps, from standard caps to trigger spray caps, at speeds of up to more than 100 caps per minute. We designed the spindle capping machine to provide our customers with a spindle capper that is easy to setup, easy to adjust, and easy to use.
spindle capping machine can tighten your cap with as much torque as you would like with outstanding torque repeatability.
Features:
A.Hand-wheel operated
B.Gripper Belt height and width adjustment
C. Spindle Wheels Spindle Wheel adjustment knobs, with lock nut hand wheel
D.No change parts required for a wide range of containers
E. 304 stainless steel drive shafts and adjustment support shafts
F. Bottom screw changeover on Spindle Wheels
Technical parameter
Technical Parameter
Power supply | AC220V / 50HZ,60HZ |
Power | 1.5KW |
Cap Diameter | 10-100mm |
Capping speed | 40-150bottles/min |
Suitable bottle height | 50~280mm |
Air sauce pressure | 0.6-0.8MPa |
Net Weight | 650kg |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Introduction:
Spindle capper machine tightens all types of screw-on caps, from standard caps to trigger spray caps, at speeds of up to more than 100 caps per minute. We designed the spindle capping machine to provide our customers with a spindle capper that is easy to setup, easy to adjust, and easy to use.
spindle capping machine can tighten your cap with as much torque as you would like with outstanding torque repeatability.
Features:
A.Hand-wheel operated
B.Gripper Belt height and width adjustment
C. Spindle Wheels Spindle Wheel adjustment knobs, with lock nut hand wheel
D.No change parts required for a wide range of containers
E. 304 stainless steel drive shafts and adjustment support shafts
F. Bottom screw changeover on Spindle Wheels
Technical parameter
Technical Parameter
Power supply | AC220V / 50HZ,60HZ |
Power | 1.5KW |
Cap Diameter | 10-100mm |
Capping speed | 40-150bottles/min |
Suitable bottle height | 50~280mm |
Air sauce pressure | 0.6-0.8MPa |
Net Weight | 650kg |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
</template>