Availability: | |
---|---|
Quantity: | |
YQA-L
YQ
Features:
(1) the equipment is small in size, easy to install, no maintenance, less power consumption. Unique integrated fully integrated design, optical, electronic, and mechanical devices are highly integrated.
(2) the high-speed galvanometer laser marking header, marking speed, with a high quality beam, long service life, installation characteristics of flexible and convenient maintenance and so on.
(3) special laser printing software, simple operation, no poison, no pollution, high stability, low failure rate. Can meet the needs of more than most of the various types of production line.
Technical Parameters:
Product Name Fiber 20W laser printer
Average power 20W
Wave length 1064nm
Maximum speed 7000mm/s
Modulation frequency range 20kHz~80kHz
Red light localization yes
Resolution ratio 0.001mm
Repeat positioning accuracy 0.002mm
Marking Area 110*110mm(apolegamy)
Minimum line width 0.01mm
Min character 0.2mm
Cooling-down method air patenting
Power Supply 0.6KW/AC220V/50Hz
Environment Request 0~35°C,Humidity≤90%
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Features:
(1) the equipment is small in size, easy to install, no maintenance, less power consumption. Unique integrated fully integrated design, optical, electronic, and mechanical devices are highly integrated.
(2) the high-speed galvanometer laser marking header, marking speed, with a high quality beam, long service life, installation characteristics of flexible and convenient maintenance and so on.
(3) special laser printing software, simple operation, no poison, no pollution, high stability, low failure rate. Can meet the needs of more than most of the various types of production line.
Technical Parameters:
Product Name Fiber 20W laser printer
Average power 20W
Wave length 1064nm
Maximum speed 7000mm/s
Modulation frequency range 20kHz~80kHz
Red light localization yes
Resolution ratio 0.001mm
Repeat positioning accuracy 0.002mm
Marking Area 110*110mm(apolegamy)
Minimum line width 0.01mm
Min character 0.2mm
Cooling-down method air patenting
Power Supply 0.6KW/AC220V/50Hz
Environment Request 0~35°C,Humidity≤90%
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.