Availability: | |
---|---|
Quantity: | |
YQC-S
YQ
Introduction for cap closing machine:
This capper machine adopts mechanical, electrical, pneumatic and integrated design.It is controlled by microcomputer, compact and reasonable structure, easy to operate and maintain; this capping machine is suitable for a variety of bottle-shaped caps and has a strong adaptability. It is a good quality automatic capping system. It is widely used in food and beverages, condiments and health products.
Characteristics of bottle cap closing machine:
1. The main pneumatic and electrical components adopt world-renowned brands with stable and reliable performance, safety and durability;
2. The bottle capping machine frame is made of stainless steel 304, with beautiful appearance, easy to clean and meet food hygiene requirements;
3.It can be used for screwing of various bottle types and bottle caps such as round, square, flat, oval, etc.
4. The capping head is made of polyurethane material embedded in aluminum alloy, which is wear-resistant and does not hurt the cap;
Technical Parameters of lug capping machine:
Cap diameter: | φ20㎜-φ70㎜ |
Bottle diameter | φ25-φ180㎜ |
Bottle height: | 40-250mm |
Air source: | 0.8Mpa 0.1m3 / min |
Power: | ≤1kw |
Power source: | AC220V,50Hz |
Capping speed: | 20-40bot / min |
Weight: about | 280kg |
Dimensions: | 2000 ×950 × 1250㎜ |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Introduction for cap closing machine:
This capper machine adopts mechanical, electrical, pneumatic and integrated design.It is controlled by microcomputer, compact and reasonable structure, easy to operate and maintain; this capping machine is suitable for a variety of bottle-shaped caps and has a strong adaptability. It is a good quality automatic capping system. It is widely used in food and beverages, condiments and health products.
Characteristics of bottle cap closing machine:
1. The main pneumatic and electrical components adopt world-renowned brands with stable and reliable performance, safety and durability;
2. The bottle capping machine frame is made of stainless steel 304, with beautiful appearance, easy to clean and meet food hygiene requirements;
3.It can be used for screwing of various bottle types and bottle caps such as round, square, flat, oval, etc.
4. The capping head is made of polyurethane material embedded in aluminum alloy, which is wear-resistant and does not hurt the cap;
Technical Parameters of lug capping machine:
Cap diameter: | φ20㎜-φ70㎜ |
Bottle diameter | φ25-φ180㎜ |
Bottle height: | 40-250mm |
Air source: | 0.8Mpa 0.1m3 / min |
Power: | ≤1kw |
Power source: | AC220V,50Hz |
Capping speed: | 20-40bot / min |
Weight: about | 280kg |
Dimensions: | 2000 ×950 × 1250㎜ |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation:
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support:
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply:
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
</template>