Availability: | |
---|---|
Quantity: | |
Introduction:
This vacuum pouch packaging: single station bag feeder, which uses linear scales, measuring cups and other quantitative feeding, plus a particle type hopper and it is suitable for a variety of pre-made bags such as three-side seal, standing bag, gusset bag and square-bottom bag, etc. It can automatically complete the functions of pick-open-bag-filling-sealing-printing date and finished product transportation, etc. Compact, small investment, fast return, suitable for small and medium packaging manufacturers.
1. Applicable bag type for pouch filling and sealing machine:
A.Standing sealable prefabricated bag
B.Ordinary standing bag
C.Zippper pouch
D.Flat bottom bag / 3 side sealing bag
E.M shape pouch
Features of vacuum bagging machine:
A.Easy-to-clean design and construction of a new generation of dust-proof racks;
B.The frame is seamlessly manufactured to ensure hygiene and safety and easy to clean;
C.Thick and strong 304SUS material is durable;
D.Suitable for various bag sizes and shapes;
E.Safety lock protection meets European and American market requirements;
F.Easy to operate and adjust;
H.No bag no filling
High-quality accessories: Mitsubishi PLC, Omron thermostat, DELTA touch screen, Airtac pneumatic components
Technical Parameter
Model | YQ-300D | YQ450D | YQ300-2 |
Auto pouch pick-up, fill, seal function | |||
PLC + Touch screen control | |||
Bag Width | 100mm ≤width≤300 mm | 250mm ≤width≤450 mm | 100mm ≤width≤300 mm |
Bag Length | 100mm ≤length≤ 350 mm | 250mm ≤length≤500 mm | 100mm ≤length≤ 350 mm |
Bag Shape | Premade Pouch | ||
Max Speed | 8-15 bags/min | 4-10 bags/min | 10-25 bags/min |
Power | AC220V/50HZ, 1 Phase 20Amps; | ||
Air | 7.0 CFM @80 PSI |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
Introduction:
This vacuum pouch packaging: single station bag feeder, which uses linear scales, measuring cups and other quantitative feeding, plus a particle type hopper and it is suitable for a variety of pre-made bags such as three-side seal, standing bag, gusset bag and square-bottom bag, etc. It can automatically complete the functions of pick-open-bag-filling-sealing-printing date and finished product transportation, etc. Compact, small investment, fast return, suitable for small and medium packaging manufacturers.
1. Applicable bag type for pouch filling and sealing machine:
A.Standing sealable prefabricated bag
B.Ordinary standing bag
C.Zippper pouch
D.Flat bottom bag / 3 side sealing bag
E.M shape pouch
Features of vacuum bagging machine:
A.Easy-to-clean design and construction of a new generation of dust-proof racks;
B.The frame is seamlessly manufactured to ensure hygiene and safety and easy to clean;
C.Thick and strong 304SUS material is durable;
D.Suitable for various bag sizes and shapes;
E.Safety lock protection meets European and American market requirements;
F.Easy to operate and adjust;
H.No bag no filling
High-quality accessories: Mitsubishi PLC, Omron thermostat, DELTA touch screen, Airtac pneumatic components
Technical Parameter
Model | YQ-300D | YQ450D | YQ300-2 |
Auto pouch pick-up, fill, seal function | |||
PLC + Touch screen control | |||
Bag Width | 100mm ≤width≤300 mm | 250mm ≤width≤450 mm | 100mm ≤width≤300 mm |
Bag Length | 100mm ≤length≤ 350 mm | 250mm ≤length≤500 mm | 100mm ≤length≤ 350 mm |
Bag Shape | Premade Pouch | ||
Max Speed | 8-15 bags/min | 4-10 bags/min | 10-25 bags/min |
Power | AC220V/50HZ, 1 Phase 20Amps; | ||
Air | 7.0 CFM @80 PSI |
About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Our services:
A-The whole system
The Seller ensure the whole system can get to the requested capacity, accept and cooperate with the Buyer to pass the final testing of the whole system.
B-On-site installation
The Seller supply the on site installation for the whole system, but the fees including air tickets, foods, hotel and translator in this period should be paid by User,the subsidy is 80USD/day.
C-Technical support
The Seller supplies the technical support of the whole use life of the system,including the capping machine,and the procedures.
D-Spare parts supply
The Seller should supply the quick-wear parts with the machine, to help the Buyer n further using. In the quality guarantee period, the Seller will supply the broken parts for free, except the easy worn parts or the damage is caused by wrong operation.After the guarantee period, the Seller will supply all the parts that the User need for the whole use life of the machine in cost price.
</template>